SMS(Short Message Service) is instant message service which based on GSM network, provides low-cost, encryption, reliable, convenient feature. Along with SMS application widely, She nzhen eTel Technologies Co., ltd., was developed ET8607 Power Controllerdevice which widely use in M2M applications, like power grid, water domination, environment protect, retail etc..
Remote server, router, networks and other electronic devices work as high load for long time, it is easy to cause the system fails and thus give rise to the system crash (stop) happen, usually, it just simple restart power, let the system restart, most of the equipment can return to normal work after restart. However, as servers, switches, routers and other equipment which not install locally, or the equipment manager be unable to arrive at the scene immediately, so it's the problem to restart system immediately.
ET8607 Power Controller help people to restart the device remotely, once the system crash or down, people just use cellphone and send an SMS then the system will be restart automaticly, which greatly reduce the fault response time, reduce maintenance workload, improve service quality, improve equipment reliability and safety. Easy realization of the device "zero wait restart services."
ET8607 features a powerful, configurable up to four phone numbers for remote restart equipment, and the product is equipped with relay-controlled AC output by popular hole socket, the installation is very simple and convenient , just ordinary cell phones, it does not require a dedicated computer and configure the software. it suitable for late night / holidays device management, remote/poor conditions of the base stations / reboot control room equipment.
2. Feature
· SMS Remote Restart
ET8607 Power controller built-in power relays, users just simply connect to the Power Controller power socket and then people can use SMS to remote restart device.
· Based on TCP/IP network for remote control (Optional)
ET8607 Power Controller supports Ethernet port (Optional), user just use web to access device and remote control. It’s for large network construction.
· DO port programmable output
FAM DO (digital output) port supports programmable output, according to the requirement of user site, the level of output level, switching time, times would be programmable.
· Industrial Design
ET8607 Power Controller with industrial design, built-in watchdog chipset to ensure the system work, MCU monitoring the GSM communications all the time, if the GSM module does not response for long time, the Restart controller will restart automatically. It is very suitable for long-term continuous work.
· Embedded Li-battery and Temperature sensor
ET8607 Power Controller built-in 1000mA Lithium battery, it can work for 6 hours if the external power supply cut off. Also, Power Controller will send alarm message to notify the user that the external power supply was cut off. the built-in temperature sensor can real-time monitoring of environment temperature, and it can be extended to the user device surface to monitoring equipment temperature, when the temperature lower or higher than the specified value, the Power Controller will send alarm message, when the temperature returned to normal, it can send notice SMS to user also.
· SMS filtering
ET8607 Power Controller support SMS filtering, it only accepts the SMS from data center as fixed format, so it filters out unauthorized junk messages.
· Worldwide applications
ET8607 Power Controller has broad range of applications, it can be used in Server, Router, firewall, network camera, network equipment etc. to more suitable of industrial M2M applications, eTel can quickly modify the software and hardware according to customer requirements.
3. Specifications
Basic
- GSM Dual Bands 900Mhz/ 1800Mhz
- GSM Quad Bands 850/900/1800/1900Mhz (Optional)
- CDMA 800mhz (Optional)
Enhanced
- SMS filtier
- Support 4 service center number
- Embedded Temperature Sensor
- Support Temperature verify
- SMS query FAM signal strength
- Li-Battery inside
- Watch dog design, ensure modem alive
- Clock synchronizing
- Support Ethernet port (Optional)
- Support SMS remote configuration
- Real time OS, steady system
- AI and the TE port upper and lower limits
- DO port programmable output
- Low consumption, industrial design
- Fully type approved with ETSI GSM Phase 2+ standard
- Enhanced EMC/EMI design
Note: DI = Digital Input
AI = Analog Input
DO = Digital Output
Interface
- Antenna: 50Ω/SMA Female
- SIM/R-UIM: 3V
- Configuration: RS232, Ethernet
- Data: RS232, Ethernet(Optional)
- DI: 3 Ports (0-3V False, 3-36V True)
- AI: 1 Port
- DO: 1 Port (4 port, 7 ports Optional)
- Power Socket
Power
- Voltage: AC 110V - 220VDC
- Consumption: 80mA@ DC12V
Others
- Dimension: 116mmx155mmx26mm
- Weight: 370g
- Operation temperature: -20~+55ºC
- Storage temperature: -40~+85ºC
- Relative humidity: 95% (no-condensing)
7.Applications
ET8607 Power Controller products can be used for many industrial applications, such as:
- Servers, routers, firewalls, network camera
- Data center, network center, communication base station room
- Companies, enterprises, network electronics equipment room
- Self-service terminals, Automatic Teller Machine
- Intelligent outdoor advertising (3 billboard) system remote restart
- Unattended equipment
- Factories, mines, energy, environmental protection, dangerous, hazardous work environments need to reboot devices remotely