Main Features
Ÿ Remote control monitoring for tracking and locating by GPRS
Ÿ Remote navigation when call back to monitoring centre
Ÿ Emergency help button set monitoring center
Ÿ Navigation by calling to the monitoring centre
Ÿ Disable/enable oil or electricity by remote control of monitoring centre
Ÿ GPRS Real-time tracking and locating continuously
Ÿ Route play back and reappearance of track
Ÿ Mileage statistics
Ÿ Over speed alarm / Geo fence alarm / Electricity cut-off alarm
Ÿ Listen in to the vehicle
Ÿ GPS antenna ON/OFF alarm
External function (Option)
Ÿ Photo function by camera
Ÿ LED advertising
Ÿ Fuel sensor detector
Ÿ LCD dispatching screen
Ÿ Car telephone
Ÿ Smart card driver identification
Detailed function
Ÿ GPS locating
Real-time checking the location of the vehicles, terminal device will automatically report position, monitoring Center will automatically pop-up map showing the current location of vehicles.
Ÿ Shooting scene photos
Ÿ Monitoring Center can be for any one vehicle at any time photo the scene pictures; can also be set in advance to allow vehicles to shoot up after the picture then transfer back to the centre.
Ÿ Voice broadcasting
You can write a text, send to the vehicle, ET518 will identify the text and then pronounce it by voice.
Ÿ Long-distance call conversation
Through the handle or dispatch screen can realize voice dialing. During a call, press the menu button for hands-free function.
Ÿ Timing of return
You can set freely for the time reporting back to the monitoring centre
Ÿ Oil and Electricity enable/disable
If special case, Monitoring center can remote control to cut off any vehicle’s circuits and gas immediately, of course, you can restore electricity supply at any time.
Ÿ Remote listen in
With the owner's permission, when the vehicle encountered the emergent situation, the monitoring center can dial to the device and listen in the vehicles, the terminal device will dial back to monitoring centre to feedback the information of the vehicles.
Ÿ Emergency help
When vehicle face emergency situation and need help, after the drive press emergency button, within 1 second, the alarm information will upload the location to monitoring center.It will be in accordance with the relevant procedures.
Ÿ Enter or exit the electronic fence alarm
Center can be set to one or more irregular range if out of the region the alarm will attributes, when the vehicles enter or exit the region set the scope, ET519 will be prompted to enter the alarm region, at the same time trigger settings beyond the regional police, the center received alarm information later can be identified and the abolition of the police.
Ÿ Monitoring center can set the itinerary range for the vehicle,
When the vehicle goes cross the authorized regional scope, the terminal device will alarm to monitoring centre.
Ÿ Over speed alarming
Monitoring centre can set the max speed of any of the vehicle, will alarm to the monitoring centre if over speeded.
Ÿ Trigger alarm
When the low-level trigger detection line detects low-level signals, or when triggered by detection of high +12 V line to detect high signal to trigger alarm, terminal device will upload information to the monitoring center immediately.
Ÿ Electricity off alarming
When the power supply was cut off, ET518 will send alarm immediately within 5 seconds for electricity off, at the same time to start back-up battery-powered (2 hours for work equipment).
Ÿ GSM blind spot information makes a report for compliment
When the vehicle drive to the GSM signal blind area, the car terminal will not be able to real-time reporting position, then the host will be automatically stored in the blind zone auto moving all positioning data, wait till the GSM signal back to normal, it will re-make a report after the central server to monitor
Main device, GPS Antenna, GSM Antenna, MIC, Double-lined 6P installing cable, Power controller,
Optional accessories: Conversation handle, Advertising screen, Dispatching screen, Camera
3. Specification
Communication module
Ÿ Communication modules can be used GSM, GRRS with voice and data communications
Ÿ Working voltage: 3.3Vⅵ4.8V;
Ÿ Max electricity current: 2A;
Ÿ GSM working frequency: EGSM900/GSM1800、GSM850/GSM1900
Ÿ GSM antenna : 50ヘ omni-directional antennas, more than 6db, wind-resistant strength of ∶ 50m / s
Ÿ Cable: 50ヘ low loss coaxial cable;
Ÿ GSM antenna connector: SLl6-K7/J7,BNC、SMA 90 degree angle
Locating module
A. Electrical Parameters
Ÿ Working voltage: 3.3V
Ÿ Working current: 80mA
Ÿ GPS receiver for satellite launches 1575.42MHz frequency of the C / A code
Ÿ Spread spectrum modulation signal
Ÿ Tracking Sensitivity: -158dBm
Ÿ Positioning accuracy: <15m
Ÿ GPS Channel: 24 channels ;
Ÿ Warm start: >20S
Ÿ Cold start: >150s;
Ÿ Maximum update rate: 4HZ
Ÿ Operating temperature range: -20∩~75∩
Ÿ Storage temperature range: -20∩~+85
B. Positioning parameters
Ÿ Latitude/longitude: Unit degree with second and minute ( ì,/∏,/∪),accuracy: 0.01∪
Ÿ Speed: Unit degree by one hour per bit(nm/h),accurency: 0.1nm
Ÿ Course heading: Unit by minute (∏),accuracy: l5∏;
Ÿ Time: with standard Green's time format: yy-mm-dd-mm-ss,accuracy : ls。
C. Precision error
Vehicle terminal positioning accuracy will not more than 15m; (95% of cases). Vehicle navigation speed is not more than 5km / h, the speed of display precision more than 0.3km / h; sail faster than 5km / h ,when the speed of display precision tolerance not more than 0.1km / h. (90% of cases)
Device parameter
Ÿ Volume: 145mm*104mm*36mm
Ÿ Color: Black
Ÿ Weight: 365G
Ÿ GPS reciever: 24 channals
Ÿ Warm start: 8s ; Cold start: 45s
Ÿ Locating precision: 〈15M 95%
Ÿ Speed precision: 0.05M/S
Ÿ Update rate: once per second
Ÿ Input voltage range: 9V-30V DC
Ÿ Operating current: 120mA @ 12V
Ÿ Working environment: -20 ~ +70 ∩
Ÿ Battery back-up time: 1.5 ~ 2 hours